Compressive strength results, calculated and reported automatically

Simplecrete takes the crushing load straight from your press and turns it into a checked compressive strength result. It calculates MPa and density, compares the strength with the mix target for that age, and adds the result to a branded report your client can see in their portal. There's no calculator, no spreadsheet and no retyping.

Book a demo
Full version for 1 month. No card needed.

How compressive strength is calculated

Compressive strength is the maximum load a specimen carries divided by the area it was loaded over:

Compressive strength (MPa) = maximum load (N) ÷ loaded area (mm²)

For a standard 150 mm cube the loaded area is 150 × 150 = 22,500 mm². A cube that fails at 742.5 kN (742,500 N) has a compressive strength of:

742,500 ÷ 22,500 = 33.0 MPa

Density is the mass divided by the volume. A 150 mm cube has a volume of 0.003375 m³, so a cube weighing 8.12 kg has a density of:

8.12 ÷ 0.003375 = 2,406 kg/m³

The arithmetic is simple. The risk is in the handling: a load written down wrong, a decimal in the wrong place, the wrong cube size in a formula, or a result compared with the wrong target. Simplecrete removes those risks by capturing the load at the source and doing the calculation the same way every time.

    What Simplecrete does with every result

      Captures the load from the press

      Scan the cube's QR label at the press and the maximum load in kN goes into that specimen's record automatically.

        Calculates strength and density

        Enter the mass, and Simplecrete calculates compressive strength in MPa and density in kg/m³.

          Checks it against the target

          Each result is compared with the target for that mix at that test age (for example 7 or 28 days) and marked pass or fail. Before a report is signed off, it's checked against its targets, so a low or unusual result is flagged for review.

            Reports it

            Results go into a test report or certificate with your logo and colours. The report moves through draft, review, approved and published, then appears in the client's portal.

              Keeps the evidence

              Each result links back to its specimen, label, cast date, curing record and delivery note, so you can show where every number came from.

                Features at a glance

                • Automatic press capture of kN
                • MPa and density calculated for every specimen
                • Pass/fail against the mix target at each test age
                • QR set labels with client, cast date and test date
                • Cube register and test scheduling
                • Automated report review before sign-off
                • Branded test reports and certificates
                • A live client portal
                • Curing tank logs and equipment calibration records
                • Traceability from delivery note to test report

                See the full platform tour.

                When the strength is low

                A low compressive strength result isn't always a concrete problem. Specimen making, curing, capping or surface preparation, and the press itself can all lower a result. The way the cube broke tells you a lot. Read our guides:

                Pricing

                • Testing laboratories: $269 per branch per month
                • Ready-mix plants: $169 per plant per month
                • Annual billing: two months free
                • Free trial: one month of the full version, with no card needed

                See pricing.

                Frequently asked questions

                How do you calculate the compressive strength of a concrete cube?
                Divide the maximum load in newtons by the loaded area in square millimetres. For a 150 mm cube the area is 22,500 mm², so a load of 742.5 kN gives 33.0 MPa.
                Does Simplecrete calculate density as well?
                Yes. Enter the specimen's mass and Simplecrete calculates density from the specimen's volume, alongside the compressive strength.
                Can the software read the load from my compression machine?
                Yes. Automatic press capture sends the maximum load in kN from the press into the specimen record. Book a demo to talk through your machine.
                How does pass/fail work?
                Each result is compared with the target strength for that mix at that test age. Results below target are marked as failures and flagged before the report is signed off.
                Which test ages can I schedule?
                Test ages are scheduled when specimens are registered, for example 7, 14 and 28 days. The lab calendar shows what's due each day.
                Is there a free trial?
                Yes. You get the full version for one month with no card needed, so you can run it on your own specimens and press.

                Let the press report the strength.

                Book a demo
                Full version for 1 month. No card needed.
                Or talk to us